PV Powered 5200 Specifikace stáhnout pdf (Strana 16)

DOCR 070366-B

A further description of the equipment features:

(1) Inverter Enclosure - This section is sealed at the factory and there are no user-serviceable

parts inside. All wiring to install the inverter is done in the wiring compartment.

(2) LED Indicators - The three LED indicators show errors or status as described in Section 5.

(3) LCD - The 20 character, 4 line LCD shows important messages regarding the inverter status

and performance.

(4) Display Control Keys - These 4 keys allow the user to access status and performance infor-

mation and to change settings via the display.

(5) Mounting Bracket - The inverter ships with a mounting bracket that allows for easy installation

of the inverter to a wall.

(6) Lockable DC Disconnect - The DC disconnect is lockable and allows DC power to be discon-

nected from the inverter. See gure 7 below.

(7) Wiring Box Cover - This is the cover for the wiring compartment. The removal procedure is

shown on page 29. Please note the DC disconnnect must be in the OFF position before this

cover can be removed.

(8) Wiring Box - This is the compartment where all the wiring for the inverter inputs and outputs

plus the RS-485 communication is done.

(9) Conduit Opening - There are six - 1“ conduit openings and two - 1/2“ conduit openings. Each

conduit opening comes tted with a conduit plug that should be removed before installing conduit

ttings. Conduit ttings need to be water tight with a NEMA 4, 4X, 6, or 6X rating.

Figure 7: Lockable DC Disconnect

Off

OFF

DC Disconnect shown with lock in off position. There are three openings on the disconnect where

a lockout padlock can be attached as shown above.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 95 96

Žádné komentáře

PV Powered 5200 Specifikace Strana 16