PV Powered 5200 Manuál stáhnout pdf (Strana 31)

Communication and Monitoring

Step 4: Move the cursor to "network", press "OK" and then enter "Input Password" interface.

Step 5: Press "right" or "left" key to move the cursor to select the figure which need to be modified.

Press "up" or "down" key to modify figure. If the password is correct will enter 'Ethernet" interface.

Step 6: Move the cursor to "Auto-IP/DHCP", press "OK" twice. LCD interface will Reboot and then

enter into home interface automatically.

If you don’t use a router, you can only monitor 1 inverter. Need to use cable to connect inverter with PC.

Parameter setting when not using router:

Refer to settings when using router:Main Menu->Settings->Network->Ethernet. In "Ethernet" interface

move the cursor to "Manual-IP", press "OK" twice(one press to confirm).

Input Password

2012-03-03 10

Press Esc to Settings

Please input customer password

Up/Down : Increase/Decrease value

Left/Right : Move Selection

Ethernet

2012-03-03 10

Confirm?

Auto-IP/DHCP

Manual-IP

Current mode: Auto-IP/DHCP

Ethernet

2012-03-03 10

Press OK to confirm

Auto-IP/DHCP

Manual-IP

Current mode: Auto-IP/DHCP

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 47 48

Žádné komentáře

PV Powered 5200 Manuál Strana 31